Chrome Rod d160 42CrMo4VSG

Brand: Stelmi Italia
Product Code: Шток хромований d160 42CrMo4VSG
Availability: In Stock

€900.00/м

Length, m

Manufacturer: Stelmi
Stem d160 42CrMo4VSG
Length from 0.1 m to 6 m.
Constant and automatic control of the optimal characteristics of chrome plating allows you to achieve a perfectly uniform thickness of the chrome coating.
The Stelmi technology uses a minimum volume of electroplating solution (approximately one-tenth of the volume of traditional electroplating), which allows for better control of the chemical composition of the solution and guarantees constant chromium plating parameters and product quality.
The rod is one of the main parts of the hydraulic cylinder, which is used in various types of equipment. Our rods are resistant to intense mechanical loads and the action of aggressive chemicals.

All products are certified and meet European quality standards.
Tolerance on external Ø: up to 17mm - f8; from 18mm - f7.
Chrome coating thickness: up to Ø17mm - 10μm; from Ø18mm - 20μm.
Hardness: 52-63 HRC;
Roughness: Ra 0.25μm.

Settings
Material:	steel CK45
Length	specified by the customer. Standard admission poriztsi at 0 ... + 5 mm.
The tolerances on diameter	f7 according to EN 20286
Chrome surface roughness	Ra 0,10÷0.25 мкм.
The thickness of plating for rods	with a diameter of 19 mm is more than 14 mm, for diameters from 20 to 125 mm - not mneshe 20 microns.
Rockwell Hardness coverage (HRC)	52 units.